Heat treatment technology is widely used, of course, for the processed products, its good or bad is completely determined by the operation of heat treatment processing.

1. When operating heat treatment processing, it is necessary to check the equipment frequently. The oil pipe and air pipe shall not leak oil or air, and there shall be no heavy oil at the bottom of the furnace.

2. We should often pay attention to check whether the automatic power failure device of the opening and closing of the furnace door is good, and whether the traffic light on the distribution cabinet works normally.

3. When operating heat treatment processing, it shall be noted that no metal articles shall be placed on the operating platform of heat treatment processing to avoid short circuit.

4. Heat treatment processing, special attention should be paid to prevent special gas leakage caused by poisoning.

5. Special attention should be paid to prevent electric shock during heat treatment processing. The floor of the operating room should be covered with rubber pads, and attention should be paid to prevent cooling water from spilling on the floor and other places.

6. During heat treatment, some cooling measures should be taken to control the temperature of quenching oil groove below 80℃.

Only by using heat treatment correctly can we get twice the result with half the effort.